NOTE
To connect a guest headset that is of a different variety to the primary headset, short press
the base subscription button while the base has an active link. Next, press the guest headset volume
up button until the indicator light turns on. When the base subscription LED stops flashing green and
yellow and remains solid yellow, the request to join will be heard in the primary user’s headset and
the primary user will have to press their call button within 10 seconds to accept the guest.
Exit a conference call
Guests’ headsets can remain as guests through multiple calls.
To remove a guest headset, press the guest headset’s call button or dock the primary user’s
headset in the charging cradle.
A single tone in the master headset will be heard as each guest leaves the call.
View guest headsets
As you add headsets to the base, an additional headset icon will appear in the Plantronics hub
screen with a number from 1 to 3 indicating the number of additional headset subscribed to the
base. The first headset is the primary user’s headset and the number inside the next headset is
the number of guest headsets subscribed to the base. The following example shows one primary
headset with two guest headsets conferenced in.
Your Savi 700 Series headset system (v28 or later) supports DECT Forum recommendations
for Enhanced security. Products with Enhanced security are marked with the DECT Forum
security logo on the base.
Both your headset and headset base are compatible with older (prior to v28) headset bases
and headsets supporting older versions of DECT. Below is helpful information if you plan to use
Enhanced security and older DECT components together.
If your Enhanced security headset or headset base is conferenced with an older headset or
headset base the resulting security level for the mixed headset and base combination will be
set to the level of the older version of DECT for all calls. This is because older system
components are not able to support Enhanced security.
All subscription details above apply when conferencing an Enhanced security headset to an
older base, or vice versa, however there are unique system alerts indicating that the system is
changing the security level from Enhanced security to the older version of security.
If an older headset is subscribed to an Enhanced security base:
• The subscription LED (lower left) will flash GREEN 3 times followed by YELLOW 2 times. This
flash pattern repeats 2 times.
If an Enhanced security headset is subscribed to an older base:
• The Enhanced security headset will play a security notification
tone
.
• The mono-coloured LED on the headset will flash 3 times, then 2 times. This flash pattern is
repeated 2 times.
Conferencing additional
headsets and Security
levels
27