INSTALLATION
1. Connect the power plugs of all devices to be operated by TV/PC Standby Stop into a
regular socket.
2. Connect the socket to the outlet of the TV+ Standby Killer.
3. Plug TV/PC Standby Stop into wall outlet and turn on power.
4. Place TV/PC Standby Stop close to the TV in the line of view for the TV remote control
– or on the desktop next to the PC or laptop computer to be operated on.
Calibration
5. Press the button on TV/PC Standby Stop for 5 seconds until a red indicator lamp lights
up behind the front panel. For the next minute, the red indicator lamp will flash once a second.
Within this timeframe all connected equipment must be shut off or put on standby.
a. TV, DVD, Video and other media equipment is shut off or put on standby in the usual way
using remote controls or buttons
b. A PC is switched off as you would normally do using the On/Off button or the ‘Shut down’
or ‘Sleep’ command
c. When calibrating TV/PC Standby Stop to a laptop computer, the batteries must be fully
charged and the laptop computer turned off or put on standby as you would normally do.
d. TV/PC Standby Stop is set to TV mode by activating any button on any remote control
within the calibration period. If TV/PC Standby Stop accepts the signal, the indicator lamp
will flash rapidly. If this does not happen, use another remote control to activate TV mode.
e. TV/PC Standby Stop is set to PC mode if it does not recieve a remote control signal within
the calibration period
6. After 1 minute TV/PC Standby Stop meassures the standby power level of the setup
and calibrates itself. It will then shut off power to the setup and be ready for operation.
OPERATION
7.
TV mode:
f. Press any key on the TV remote control. The indicator Lamp of the TV/PC Standby
Stop will light up and all connected devices will recieve power. If TV/PC Standby Stop
does not respond to a remote control, activate TV/PC Standby Stop using any other
infrared remote control.
g. Turn on the TV or any other device in the setup as you would normally do using a
remote control or an on/off buton.
8.
PC mode:
h. Press the button on TV/PC Standby Stop. The indicator Lamp of the TV/PC Standby
Stop will light up and all connected devices will recieve power.
i. Turn on the PC, laptop computer or any device in the setup as you would normally do.
9. If no equipment is turned on, the TV/PC Standby Stop will automatically shut off power
to the setup after 12–18 seconds
10. The TV/PC Standby Stop will automatically turn off power to all connected devices
once they are shut down or put into standby mode. For a setup with a laptop computer,
the TV/PC Standby Stop will cut off power when the batteries have been fully charged.
Always leave the wall outlet and the master switches of the connected devices on.After changing
the amount of connected devices in the setup or if a device is replaced TV/PC Standby Stop must
be recalibrated following the instructions above.
b
a
d
f
h
5
OFF/STANDBY
OFF
Press and hold for 5 seconds to calibrate
Press to activate power supply in PC mode
A sensor receives a signal from the TV
remote control. To put TV/PC Standby
Stop into TV mode, it is essential that the
TV/PC Standby Stop is situated visibly near
the TV set.
Indicator lamp provides feedback during
calibration and when TV/PC Standby Stop
is activated by remote control or by pressing
the button in PC mode.
Universal Elspareskinne
TV
PC & Mac
Bærbar
Permanent strøm
Tilbehør
DVD
(1-19W)
Skærm
(1-8W)
Printer
(4-10W)
Modem
(4-13W)
Satellit modtager
(5-30W)
Spillekonsol
(18-80W)
Universal Elspareskinne
TV
PC & Mac
Bærbar
Permanent strøm
Tilbehør
DVD
(1-19W)
Skærm
(1-8W)
Printer
(4-10W)
Modem
(4-13W)
Satellit modtager
(5-30W)
Spillekonsol
(18-80W)
ACCESSORIES
TV or PC
Universal Elspareskinne
TV
PC & Mac
Bærbar
Permanent strøm
Tilbehør
DVD
(1-19W)
Skærm
(1-8W)
Printer
(4-10W)
Modem
(4-13W)
Satellit modtager
(5-30W)
Spillekonsol
(18-80W)
Universal Elspareskinne
TV
PC & Mac
Bærbar
Permanent strøm
Tilbehør
DVD
(1-19W)
Skærm
(1-8W)
Printer
(4-10W)
Modem
(4-13W)
Satellit modtager
(5-30W)
Spillekonsol
(18-80W)
Universal Elspareskinne
TV
PC & Mac
Bærbar
Permanent strøm
Tilbehør
DVD
(1-19W)
Skærm
(1-8W)
Printer
(4-10W)
Modem
(4-13W)
Satellit modtager
(5-30W)
Spillekonsol
(18-80W)
3
2
1