background image

13

Part No. 000846, 29-m08-2018

Eclipse Gearless Owner’s Manual

8. MAINTENANCE

Regular maintenance (performed by your Authorized Savaria Dealer) will keep 
your elevator in proper operating condition. Please remember, as the owner of 
this elevator, you are responsible for making sure that maintenance and 
upkeep are done on a regularly scheduled basis.

If the unit is shut down for an extended period of time, contact 
your Authorized Savaria Dealer to perform complete 
maintenance before starting up the unit.

IMPORTANT:

 Please test the phone in your elevator during every maintenance. 

If the phone is inactive, please shut down the elevator until the phone line is 
active. This applies to all lifts in a hoistway or enclosure models

To ensure proper operating condition of your unit, the items listed below must 
be inspected and, if necessary, serviced 

every six months 

by your Authorized 

Savaria Dealer. Additional inspections may be required depending on usage.

1

Tighten all rail and cab fastening bolts.

2

Lubricate the door hinges and adjust the door closure if required.

3

Lubricate the rails with light grease, such as white lithium.

4

For a Gatemate operator, lubricate the shaft and bushing using a general 
silicone lubrication spray (lubricate on installation as well).

5

Inspect the travelling cable for wear. Replace the cable if any cuts or damage 
to the jacket are evident.

6

Replace the batteries inside the control panel as indicated on the battery 
label.

7

Perform the required maintenance to the door locks.

8

Activate and test the safety mechanism.

9

Check, and if necessary, adjust the motor brake air gap. Refer to the Eclipse 
Gearless Maintenance and Troubleshooting Guide (P/N 000866) to do this.

10

Check that the phone is functioning properly.

Units installed in adverse environments will require additional 
maintenance on a monthly basis.

NOTE

NOTE

Summary of Contents for Eclipse Gearless

















Reviews: