SPK-S1WSx-xx Quick Reference Guide | 009-1886-02
2 of 2
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2021 Savant Systems, Inc. | 210118
| 508.683.2500
Connect Power
The IP Audio Products have an AC Power connection.
Make the appropriate power connections before attempting discovery within the Savant Pro App.
Associate Mode
Associate Mode indicates the WiSA Sub is not paired with any WiSA transmitting device. To enter this mode, hold the reset button for 10
seconds.
For more information on WISA setup process, see the
Smart Audio WISA Setup Guide (009-1903-xx)
on the Savant Community.
Auto Switch Mode
The default mode for the Smart Audio WiSA Sub 1.
In this mode, the WiSA Sub will switch between WiSA and analog inputs as needed. To enter this mode, press the reset button until the WiSA
LED turns green. This mode will remain active through reboots.
–
Both the WiSA and the LFE input are active.
–
If a WiSA device is connected, input will automatically switch to WiSA.
–
If the WiSA LED transitions to Standby/Reset or Pairing, input will switch back to analog.
–
If the user presses and holds reset button, input will be switched to WiSA so that a test tone can be heard.
Forced Analog Mode
The analog-input only mode for the Smart Audio WiSA Sub 1.
To enter Forced Analog Mode, toggle the LFP slope switch 4 times within 10 seconds. This mode will remain active through reboots.
–
The LFE input will always be active, and WiSA output will not be active.
–
The WiSA LED will be turned off to indicate this mode.
–
Press and hold the reset button to place the unit back in Auto Switch mode.
NOTE:
The WiSA logo, WiSA, WiSA Ready, and WiSA Certified are trademarks or certification marks of WiSA LLC. Third-party trade names, trademarks
and product names are the intellectual property of their respective owners.
