Wiring and Connections
Below is a high level diagram displaying the Savant Intercom Server Solution. After installing the SIS-5000S-xx Intercom Server into a racking type
system, the following connections can be made. Unless otherwise stated, the connection to the local Ethernet switch is a standard Cat 5 with RJ-45
connection.
1.
Connect the Ethernet port of the SIS-5000S-xx to a port on the Ethernet switch within the local network.
2.
Connect the Ethernet port from the Savant Host within the Savant Control System to a port on the Ethernet switch.
3.
Connect a wireless router to the Ethernet switch. (This may already be wired as part of the complete Savant Control System)
4.
After installing and wiring the 3rd Party Intercom Door/Gate Entry station, connect the station to the Ethernet switch.
5.
If a Public Announcement system is being integrated, connect the system to the Ethernet switch within the local network.
6.
Once wired, the SIS-5000S-xx Intercom Server, iOS device(s), PA system and Intercom/Door Entry system can be added to the Savant Control
System using the RacePoint Blueprint design tool. Refer to the
Savant SIS-5000S-xx Intercom Deployment Guide
.
7.
Once added to Blueprint, the Savant Configurator can be used to configure the individual functions for each part of the system. Refer again to
the
Savant SIS-5000S-xx Intercom Deployment Guide
Rack Mounting
Savant o
ff
ers an optional 1U Rack Shelf for installation of the SIS-5000S-xx Intercom Server and/or Savant Host into a 19-inch rack system. The
RCK-3000-xx provides front access via a removable faceplate, and sliding tray. An open shelf design provides proper ventilation and easy access to
wiring. For more information, refer to the
Savant Rack Shelf Quick Reference Guide (009-0558-xx)
SIS-5000S-00 | 009-1302-01 | 150626
SIS-5000S-00 | 009-1302-01 | 150626
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2015 Savant Systems, LLC
2 of 2
