Savant SIS-5000S-00, Quick Reference Manual

Page: 1 / 2

The Savant® Intercom Server enables 3rd Party Intercom Door/Gate
entry products and intercom enabled iOS devices to create a
Savant® Intercom Server Solution that integrates easily into an
existing Savant Control System. Once installed and configured, the
Savant Intercom can communicate with various 3rd Party Intercom
Door/Gate entry systems to supply audio and/or video of the
entrance to your facility or home.
This Quick Reference Guide gives basic information about the
Savant Intercom along with initial installation and wiring procedures.
Once installed and connected, refer to the
Savant SIS-5000S-xx
Intercom Deployment Guide for configuration and integration
procedures.
Box Contents
(1) Savant Intercom Server (SIS-5000S-00)
(1) Power cord
(1) Quick Reference Guide (this document)
Supported Devices
•
1U Rack System (RCK-3000-xx)
•
3rd Party Door Entry systems
•
Holovision Analog Intercom Door/Gate Entry
•
Holovision VoIP Intercom Door/Gate Entry
•
Siedle Analog Intercom Door/Gate Entry
•
Mobotix VoIP Intercom Door/Gate Entry
•
Savant TrueControl™ II for iOS
•
TEL-IAD2-xx Integrated Access Device (Analog to VoIP
conversion)
•
PAS-1000-xx Public Announcement System
Specifications
Environmental Environmental
Temperature
Operating : 50° to 95° F (10° to 35° C)
Temperature
Storage : -40° to 116° F (-40° to 47° C)
Humidity 5% to 95% RH (non condensing)
Cooling 15 cubic feet per minute (CFM) recommended
Noise 12dBA at idle
Dimensions and Weight Dimensions and Weight
Height 1.4 in (3.6 cm)
Width 7.7 in (19.7 cm)
Depth 7.7 in (19.7 cm)
Weight 2.6 lb (1.20 kg)
Rack Space 1U
Power Power
Input Power 100-240V AC 50/60Hz
Maximum Power 85W
Memory Memory
Memory 8 GB
Compliance Compliance
Safety and
Emissions
FCC Part 15 | CE Mark | C-Tick
RoHS Compliant
Minimum Supported Release Minimum Supported Release
Savant OS da Vinci 7.0.2
Front Panel
Power LED Illuminates white when host is powered On.
Rear Panel
Power Button
Power On: Press while powered O ff
Power Button
Power O ff :
1. Launch a Terminal window from the SDE.
2. SSH into the SIS-5000S:
ssh RPM@<ip_of_ SIS5000S>
3. Enter default password: RPM.
4.At the prompt, enter shutdown command:
sudo shutdown -­‐P now
5. When prompted, enter the default password
again: RPM.
6. Verify the SIS-5000S Power LED is o ff .
7. Unplug the SIS-5000S.
Power Input 100-240V AC 50/60Hz
Ethernet
10/100/1000 Gigabit Ethernet Port. Connect
to a managed Ethernet switch within your
local network.
Cooling Vents
Output for cooling of the internal processor.
DO NOT BLOCK
Note: Connections not identified in the diagram above are not
functional within a Savant Configuration/Installation.
Power Management Recommendations
Savant recommends a pure sine wave uninterruptible power supply
(UPS) with the ability to shut down the SIS-5000S before the
battery runs out of power.
Never remove power from the
SIS-5000S before shutting it down .
Additional Documentation
Refer to the following documents located on the Savant Customer
Community for for additional information.
•
Savant intercom Server (SIS-5000S) Deployment Guide
SIS-5000S-00 | 009-1302-01 | 150626 SIS-5000S-00 | 009-1302-01 | 150626 45 Perseverance Way, Hyannis, MA 02601
Copyright © 2015 Savant Systems, LLC 1 of 2 savant.com | 508.683.2500
Savant® Intercom Server
Quick Reference Guide
For Product Info