PAV-VIMVP1F/PAV-VIMVP1C | 009-1603-00 | 180411
Copyright 2018 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
1 of 2
Box Contents
(1) Savant IP Video Transmitter (PAV-VIMVP1F/PAV-VIMVP1C)
(1) SFP+ module (PAV-VIMVP1F only)
(1) Installation Kit (075-0199-xx)
(2) Mounting Brackets
(4) Screws
(1) IR Emitter (4ft long)
(1) Power Cord
(1) Power Adapter
(1) 4-pin Control Connector
(1) Quick Reference Guide (this document)
Required Components
Savant IP Video Receiver
Savant System Host
Savant qualified 10G Managed Network Switch
Savant User Interface
Savant Design and Configuration Tools
Compliance
Safety and
Emissions
FCC Part 15
CE
C-Tick
RoHS
Compliant
1 = at 24 Hz
2 = at 25 Hz
3 = at 30 Hz
4 = at 50 Hz
5 = at 60 Hz
Video
HDR
Supported
Supported
Formats
640x480
5
720x480
5
720x576
4
800x600
5
1024x768
5
1280x720
4
1280x720
5
1280x1024
5
1920x1080
1
1920x1080
3
1920x1080
4
1920x1080
5
1920x1200
5
3840x2160
1
3840x2160
2
3840x2160
3
3840x2160
4
3840x2160
5
Audio
Supported
Formats
Pass-though of all HDMI audio formats are
supported.
Power
Input Power
12V 3A DC
Nominal Power
16 W (PAV-VIMVP1F)
19 W (PAV-VIMVP1C)
Maximum Power
36 W (PAV-VIMVP1F)
36 W (PAV-VIMVP1C)
Dimensions and Weights
Height
1.38 in (35.0 mm)
Width
8.27 in (210.0 mm)
Depth
5.47 in (139.0 mm)
Weight
Net: 3.3lb (1.5 kg) | Shipping 4.8lb (2.2 kg)
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Specifications
Item
Description
RSVD LED
Reserved for future use.
Blue
- LED on by default.
Link TX LED
Off
- No valid connection
Blue
- Valid link
Blinking
- Sending Ethernet Data
Link RX LED
Off
-
No valid connection
Blue
- Valid link
Blinking
- Receiving Ethernet
Video LED
Off
- No video signal detected.
Blue
- Video signal detected.
Power LED
Off
- Device is off. No power applied.
Red
- Main board is powered
P1
Reserved for future use.
RSVD
Reserved for future use.
A
B
C
D
E
F
G
Front Panel
Network Configuration
To ensure that the IP Address will not change due to a power outage,
Savant recommends using DHCP reservation within the router. By
using this method IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE
: Setting DHCP reservation varies from router to router. Refer to
the documentation for the router to configure DHCP reservation.
Network Requirements
The A/V over IP Device requires a Savant qualified 10G managed
switch. This switch must be configured for the A/V over IP devices. For
more information on this see the
Savant Audio/Video over IP Network
Configuration Guide
on the
Savant Customer Community
.
A
B
C
D
E
F
G
Minimum Supported Release
Savant OS: da Vinci 8.8
For Product Info
Savant® IP Video Single Input IP Transmitter 4K UHD
with Control (PAV-VIMVP1F/PAV-VIMVP1C)
Quick Reference Guide
