HDMI Over CAT5/6 Extender
(HCX-1010)
Quick Reference Guide
009-0306-04
HCX-1010-00
Copyright © 2012 Savant Systems LLC, SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
Savant Confidential and Proprietary
052912
45 Perseverance Way, Hyannis, MA 02601 Phone 508.683.2500 Fax 508.683.2600 www.SavantSystems.com
Rear Panel
Connectors
Link
RJ-45 Shielded
Ethernet
CAT5/6 Ethernet Connector
Ext IR
Reserved for future use.
Interconnect the Units
To interconnect the units, do the following:
1.
Connect the
Savant Extra Long Range Extender Over one CAT5/6 cable to the A/V
and Ethernet source devices such as infrastructure, routers and switches using short
HDMI and CAT5/6 cables.
2.
Do the same operation between the Extender receiver and the extended HD display
and any network devices that are to be connected.
3.
When the Extender Transmitter and Receiver units have been connected to sources,
displays and network equipment, connect a single CAT5/6 extension cable between
the Transmitter and Receiver. The Transmitter and Receiver units may be up to 330
feet apart.
Details for Connecting the Transmitter and Receiver
1.
Connect an HDMI source to the Transmitter unit. Also connect an Ethernet source to
the Transmitter unit.
2.
Connect the Receiver unit to a suitable display using an HDMI cable. Connect a
CAT5/6 cable to the Display.
3.
Connect the Transmitter unit to the Receiver unit using the CAT5/6 Ethernet cable.
4.
Apply power to all connected units. Plug the AC power adaptors between the power
strip and the
5V DC
input connectors
on the Transmitter and Receiver.
Important:
Savant recommends the use of a CAT6 solid core cable for optimum
performance. Also, a single continuous run from the transmitter to the receiver is
recommended. Use of patch panels or wall plates may interfere with the signal.
Wiring Diagram for the HCX-1010 - HDMI over CAT5/6 Extender
Additional Documentation
For more documentation, go to
http://www.SavantSystems.com
and navigate as follows:
>
Dealer Login > Knowledge Base >
•
Click link:
RacePoint Blueprint
™
Not
Supported
CAT 5/6
Ethernet
Connector
CAT 5/6 Link
Connector
to Sender
