The Component Profile Tool (CPT-1212) is a general purpose tool for
creating, testing, and modifying the .xml Profiles used in the RacePoint
Blueprint® software. The CPT-1212 kit includes all the tools described in
the Box Contents section below set in a durable carry case.
The CPT-1212 works with both the Profiler and IR Translator applications
to create new or modify existing .xml Profiles. This Quick Reference
Guide describes each of the tools in the kit along with general
information on connecting the system. For information on using the
Profiler and IR Translator software to test, modify, or create .xml Profiles,
refer to the Profiler and Component Profile Tool Reference Guide
009-1037-xx on the
Savant Customer Community
.
Box Contents
(1) SmartControl 12 (SSC-0012-xx)
(1) Installation Kit SmartControl 12 (075-0180-xx)
(1) SmartControl Mounting Plate (074-0577-xx)
(1) 12V DC 1.5A Power Supply (025-0166-xx)
(4) 6-pin Screw Down Plug-in Connector (028-9352-xx)
(1) Cable Tie (014-0071-xx)
(4) RJ45 to DB-9F Serial Control Adapters
(1) DB9 Gender Changer
(1) IR Learner (064-0224-xx)
(1) Keyspan High-Speed USB to Serial Adapter (064-0225-xx)
(2) Ethernet Cable - 2.0 ft (60.96 cm) (064-0059-xx)
(1) IR Repeater Cable (064-0020-xx)
(1) IR Learner (064-0224-xx)
(1) Technicians Screwdriver (015-0075-xx)
(1) Carry Case
(1) Quick Reference Guide (this Document)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 80% RH (non-condensing)
Dimensions and Weight (Carry Case with all Components)
Dimensions and Weight (Carry Case with all Components)
Height
12.25 in (31.12 cm)
Width
16.0 in (40.64 cm)
Depth
5.5 in (13.97 cm)
Weight
Net: 4.25 lb (1.93 kg)
Shipping: 5.00 lb (2.27 kg)
Power (SSC-0012 Controller)
Power (SSC-0012 Controller)
Input Power
12V DC 1.5A
Max Power
18 watts
Compliance
Compliance
Safety and Emissions
FCC Part 15 | CE Mark | C-Tick
RoHS
Compliant
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 7.0
SSC-0012 Controller
The main component in the CPT-1212 kit is the SSC-0012 controller. The
Profiler software first transmits the command data to the controller. The
controller then converts the data and transmits this data to the Unit
Under Test (UUT). Dependent on the UUT, the data sent to the UUT can
be IR, RS-232, or IP.
Front Panel
A
Reset Button
Press and hold for 5 seconds while powered
on to clear network settings. The
Status
LED
will blink rapidly when controller starts its
boot sequence.
B
Status LED
O
ff
:
No power
Blinks Once:
Access Point Provisioning Mode
Blinks Twice:
Waiting for a Host Connection
Blinks Three Times:
Connecting To Host
Solid:
Connected to Host
Rear Panel
Note:
Connections not identified in the diagram above are not used
when using the Component Profile Tool to create, test and modify .xml
Profiles.
A
Ethernet
• 10/100 Base-T auto-negotiating port with Link
and Activity LEDs.
• 8-Pin RJ-45 female.
• Connects to either a local unmanaged switch/hub
or directly into the Ethernet port on the SDE/
MacBook. Refer to the
section.
B
Link LED
•
O
ff
:
Ethernet link is not established.
•
Green Solid:
Ethernet link is established.
•
Green Blinking:
Ethernet activity is occurring
C
Data Rate
LED
•
O
ff
:
10 Mbps data rate
•
Green:
100 Mbps data rate
D
RS-232
• When selected in software, the RS-232 port
transmits and receives command codes between
the SSC-0012 and Unit Under Test. Refer to
section.
• 8-pin RJ-45 female.
• Ports 1 or 2 are selectable in the Profiler software.
E
IR
• When selected in software, the IR port transmits
command codes to the Unit Under Test (UUT).
• IR Repeater/Flasher connects to the required port
on the 6-pin Screw Down Plug-in Connector.
• IR Ports 1 - 6 are selectable in Profiler software.
F
Input
Power
• 12V DC 1.5A - Connect to included power supply.
G
Cable
Lance
• Used with included cable tie to secure power
supply connection.
CPT-1212-00 | 009-1276-01 | 160805
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2016 Savant Systems, LLC
1 of 2
Component Profile Tool
Quick Reference Guide
For Product Info
