4
TVM-N-BA-e-2020
5
Possible applications
The TVM-N test stand has been designed to accommodate most SAUTER force
measuring devices without any great difficulty. It has a wide range of applications and
can be operated manually. It can also perform individual functions independently.
These include, for example, infinitely variable speed adjustment, automatic up and
down movement with preset repetitions (up to 1000 cycles). It can be used for
material testing in the metal, plastics and textile industries. It can also be operated
with SAUTER software (AFH) and can be conveniently controlled from there using a
PC. This software is also able to document force-time and force-displacement. It is
also possible to operate it only with an FH force gauge, because here the setting
options of the FH force gauge can be used, for example to protect the test stand from
overload with the STOP value.
•
Choose the right test stand with regard to the maximum force you require.
Adjust the force gauge used to the maximum force or take special care when
setting the travel distance. (Possible destruction of the force gauge)
•
Under no circumstances should you attempt to open, repair or modify the unit.
Contact SAUTER GmbH.
•
The test bench is not suitable for operation in a humid environment. Avoid
penetration of moisture into the housing under all circumstances.
•
Do not use sharp objects to operate the buttons.
•
Use the limiting rings on the test bench to check the travel. Precise adjustment
of the travel using the limiting rings prevents damage to the test stand and the
force gauge used.
•
From time to time, moisten the rods with a lubricating oil.
Turn off the unit and unplug the power cord if you are not going to use it for a long
time.