4 / CARING FOR AND CLEANING YOUR APPLIANCE
EN
• CHANGING AND CLEANING THE ANTI-GREASE FILTERS
• INSTALLING THE CARBON FILTER (OPTINAL), SEE PIC.8
• CHANGING THE LIGHT BULB
— Tear down your cooker hood as per the
approach shown on
Pic. 7
— You can clean the fi lter as below:
1. Soak them for about 3 minute in hot
water (40-50 degrees) with a grease-
loosening detergent then brush it gently
with a soft brush. Please do not apply too
much pressure ,avoid to damage it .
2. It can be put into a dishwasher with
detergent ,set the temperature at around
60 degrees.
— Please do not use abrasive detergent for
it will damage the hood.
— Remove the fi lters
see Pic.7
.
— The charcoal fi lters
(Pic.8)
are located
at either end of the motor. Turn the
charcoal fi lters anti-clockwise until they are
unscrewed.
— Apply reverse procedure to uninstall the
charcoal fi lter.
Take the bracket and glass off and then take
the broken light bulb off,
See Pic 9.
Fix the new light bulb,glass and bracket on.
Attention:Before changing the lights, ensure
that the appliance is not live.
Note
Make sure that cooker hood is shut
down before cleaning.
Warning:
the charcoal cannot be washed or re-
cycled. It should be changed at at three or
six months according to your cooking habit
Pic 7
Pic 8
Pic 9
C l o s e
Open
• INSTALLING THE CARBON FILTER, SEE PIC.8
2
9
