12
USING THE PROGRAMMER
•
•
•How to set the time
--
When supplied with electricity
The display flashes at 12:00 (fig.1)
Set the time using the + and - buttons (holding
down the + or - makes the numbers go faster)
(fig.2).
Example: 12:30
Press the “
” touch control to validate.
The display stops flashing (fig.3).
•How to adjust the time
- To set the time on the clock
The function selector switch must be in the 0
position (fig.1).
Hold down the “
” button for a few
seconds until 0.00 appears. Keep held down
until the time appears again, then let go
(fig.2).
While the time is flashing, set the time using
the selector (fig.3).
Press the “
” touch control to validate
(fig.4).
fig.1
fig.3
fig.2
4 / USING YOUR APPLIANCE
Warning
If there is no confirmation from the
“
” button, the time is recorded auto-
matically after a few seconds.
fig.2
fig.3
fig.4
EN
99642021_A.qxp 27/03/2007 17:25 Page 12
