Sauter GmbH
Tieringerstr. 11-15
D-72336 Balingen
E-Mail: [email protected]
Tel: +49-[0]7433- 9976-174
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
Instruction Manual
FK Tensio
FK_T-BA-e-1110
1
Model: FK Tensio
Thank you for buying a SAUTER force gauge. We hope
you are pleased with your high quality force gauge with its
big functional range. If you have any queries, wishes or
helpful suggestions, do not hesitate to call our service
number.
„Sensor inside“ means the measuring cell is inside the
housing.
Table of contents
1. Included in delivery
2. Working conditions
3. Electrical power supply
4. Technical data
5. Operation
6. Backside fixing on a test stand
7. Adjusting procedure
8. Declaration of conformity
1.
Included in delivery
- SAUTER FK
-
Power cable
-
Standard attachments as shown below
Terms:
Track
= continuous measurement
Peak
= Capture of the maximum value
The measuring device of model FK Tensio is used for
tension tests of static or moving cables, wires or similar
testing objects.
For testing, the cable or wire has to be inserted as shown
in the following picture below:
Data in mm
Sensor
Inside
LCD
Force Sensor
(M7 x 0.75mm pitch)
195 mm
83 mm