sauter EY6LO00F001, Operating Instructions Manual

Page: 7 / 60

modu600-LO
Preface
D100408262 R: 02, V: 01
7/60
1 Preface
1.1 modulo 6 I/O modules and the local modu600-LO operation unit
modulo 6 is the latest generation of the SAUTER automation stations for building
automation. The
modu680-AS and modu660-AS automation stations and the
modu612-LC link coupler can be extended using I/O modules to receive various types of
signals (inputs) or to drive them (outputs). To better identify the variety of signals in the
plant, the I/O modules can be extended using LOIs, i. e. local operation and indication
units. These units display the state of the signals, whether an error message applies for
this signal or whether an output signal has been manually overridden and is no longer in
automatic mode. The LOI unit can be used for local (manual) operation and allows
setting output signals manually (override), e.g. during acceptance or maintenance work.
modu600-LO is a universal module for all modulo 6 I/O modules that can be plugged in
or off on the modules. The module does not need dedicated programming or
configuration and receives all of the necessary information from the I/O module.
modu600-LO offers a graphical overview of all signals and detailed information for every
channel, such as the specific configuration (e.g. 0
…10 V, Digital In etc.) or the assigned
house address label. There is also an overview of all the labels in the form of a list.
The module also offers general information about the module itself, such as serial
number, firmware versions etc., as well as the same information for the connected
I/O module.
modu600-LO also temporarily allows wiring or signal tests to be performed on non-
configured I/O modules.