sauter EY6LO00F001, Operating Instructions Manual

Page: 47 / 60

modu600-LO
FAQ
D100408262 R: 02, V: 01
47/60
9 FAQ
9.1 What happens when LOI and WS/app are used simultaneously?
New operating mode as of FW. 1.2.3
Rules:
•
Manual override over LOI or App is regulated according to the "last-win" principle.
•
The modulo 6 app can reset an override of LOI, and vice versa
•
Manual override over LOI or app is persisted in the I/O module
•
If LOI is removed or Bluetooth communication is interrupted, overrides are
maintained by the I/O-modules
•
Overrides are not lost in case of power failure
•
Only authorised users can perform overrides via the modulo 6 App (login)
•
Secure Value applies when no override has been set and the AS is not present
The behaviour when LOI and modulo 6 App are used simultaneously concerning
overriding output signals is governed by the "last wins" principle. This means that a
signal override from one can be reset by the other (Reset, Auto) or overridden with
another value. There is no priority of one over the other.
The override values are stored on the IO module so that it is only possible to effectively
reset them if they are explicitly reset via LOI or App. In case of loss of app access data
and in the absence of LOI, the only remaining option is to reset the station and download
the project.
9.2 What does this icon mean?
This icon indicates that the communication between modu600-LO and the I/O module is
not working even though the I/O module is supplying power to modu600-LO
Make sure that the module is installed correctly, that the spring contacts are clean and
undamaged, and that the contact areas of the I/O module are clean and free.
9.3 Which icon is displayed, and when?
The following table illustrates the conditions under which the different symbols are
displayed. When multiple states coexist simultaneously, the following prioritisation
generally applies:
1.
Alarm/Fault
2.
Override
3.
Out of Service