sauter EY6LO00F001, Operating Instructions Manual

Page: 20 / 60

modu600-LO
Functionality and operation
20/60
R: 02, V: 01 D100408262
7.4 Operation
The operation takes place using the 4 push buttons. The and push buttons are
used to switch the focus between the different active buttons or change an output value
(in edit mode). The push-button confirms a selection or a value change or displays
a new view. The push-button has the opposite effect.
Push-
button Function(s)
On the overview page:
If the focus is set on the central text field, when the button is held down (>3 sec.) the info view is
displayed.
If the focus is set to a channel that is overridden, a long press (>3 sec.) will remove the override.
Other views:
When the button is pressed you navigate back to the overview page.
In Edit mode, value changes are ignored and the mode is exited.
On the overview page:
If the focus is set on the central text field, when the button is held down (>3 sec.) the list view is
displayed.
If the focus is set on any channel, when the button is held down (>3 sec.) the detailed view of the
channel is displayed. When the button is pressed briefly, the edit mode for output signals is
switched on. The edit mode is indicated by the additional orange font. When pressed again, the
new output value is confirmed and the edit mode is exited.
In both cases, the focussed state can be identified by its blue frame and a slightly darker
background.
In the detailed view:
If the focus is set on an editable field, the frame colour is orange and the button is pressed briefly
to switch the edit mode on. I
Additionally, it is also possible to change the channel configuration of the channels that are not
assigned with the CASE Engine plan. For example, a non-configured UI channel can be changed
to 0 ... 10 V, 0 ... 20 mA etc. This local configuration is not saved and will be lost in case of power
failure or removal of the LOI.
In the list view:
When the button is pressed the detailed view of the focussed channel is displayed.