sauter equitherm EQJW126F001, Mounting And Operating Instructions

Page: 16 / 110

Operation
14
BA_EQJW126F001_EN001
3. Select – –.– – [

].
4.
Confirm selection ].
The public holiday is deleted.
Note: Public holidays that are not assigned to a specific date should be deleted
by the end of the year so that they are not carried on into the following year.
1.8.2 Setting vacation periods
During vacation periods, the controller constantly remains in reduced operation.
A maximum of 10 vacation periods can be entered.
Parameter WE Level / Range of values
Vacation
period
(START, STOP) – Extended information level / 01.01 to 31.12
Proceed as follows:
1. In the extended information level (normal
switch position ) select data point for
vacation peri- ods [

].
Display:
2.
Open data point for vacation periods
]. Display:
START
3. If applicable, select – – – – [

].