CO Y5-BA-e-2120.docx
3
1
Short description
•
Stainless steel IP66 (acc. to EN 60529) tension / compression load cell
•
Suitable for test stands, force gauges, automation plants, etc.
•
Accuracy OIML R60 G1
•
Very low height
•
Option on request accuracy C4
•
RoHS conform
2
Available models
Capacity
Model
0,5 kg (
≈5N)
CO 0.5-Y5
1 kg (
≈10N)
CO 1-Y5
5 kg (
≈50N)
CO 5-Y5
10 kg (
≈100N)
CO 10-Y5
3
Introduction
Please pay attention to the notes of the operating manual: read these operating manual
carefully before commissioning, even if you already have experience with SAUTER
measuring cells.
After receiving the measuring cell, it should be checked in advance whether no
transport damage has occurred, whether the outer packaging or other parts or even
the article itself has been damaged. If any damage is evident, please inform SAUTER
GmbH immediately.
4
Warning notes
Observe the national accident prevention regulations.
Not correct executed use of the measuring cell can lead to serious injuries, death,
material damage and personal injuries. Use only by trained and experienced people.
Never load more than the max. capacity to a measuring cell. Overloaded measuring
cells no longer have the required accuracy. Overloaded or deformed measuring cells
are no longer allowed to use and must be changed quickly.
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value when
shortened or extended the cable length.