Safety
Instructions!
Please read the operating
instructions and
safety points carefully
before operating your
SAUGKRAFT Cube vac.
This will ensure you
maintain the performance
and avoid any damage to
your vacuum. Retain
this leaflet for future use.
Overall Description:
A) Ergomonic Handle Grip
B) Cord Winding Hook and
Quick Release Cord Hook
C) Handle release button
(on side of vacuum)
D) On/Off Power Switch
E) Dirt Cup Release Button
F) Dust Cup
G) HEPA Filter
H) Dust Cup Cover
I ) Turbo Floor Brush
A
B
C
D
E
F
G
H
I
Please read carefully:
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Make sure that the switch is off before the vacuum
is plugged into the mains socket. Always unplug
the cleaner when not in use.
Do not use the cleaner with a damaged lead or plug,
or if it is working improperly, dropped, damaged or left
outdoors.
Never lift the cleaner by the lead or attempt to
unplug it from the mains socket by pulling on the
lead. Always hold the plug firmly to remove it from
the mains socket. The lead should never be pulled
over sharp edges,
or exposed to heat or chemicals. Avoid snagging
it under furniture and doors.
The mains lead of this appliance cannot be
replaced. If the lead is damaged the appliance
should be discarded.
Ensure that your vacuum always remains
dry and does not come into contact with water
or any other liquid. It is not designed for wet
vacuuming and must never be used on damp
carpets or wet floors.
Do not pick up cigarettes, hot ashes or matches
with your cleaner.
Do not touch the plug with wet hands. Always
disconnect the plug from the mains socket and
switch all controls to off before cleaning the unit or
unclogging nozzles.
Never use your vacuum without the Filter
in place or if the dust cup is blocked or full.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
…to both empty the dust cup and clean the Filter
and Casing at least once a week with normal
usage. Failure to do this will effect cleaning
performance and result in the motor overheating.
We recommend the Filter should be replaced at
least once a year.
It is important...
English
7
Optional Soft
Dusting Brush
Optional
Crevice Tool
HEPA
Filter
