sauermann VT 210, User Manual

Page: 18 / 24

A keypad is displayed on the bottom of the screen.
➢ Select the letters with arrow keys then press
OK
.
To go from the lower case keypad to the upper case keypad then to the numeric keypad: press the function key:
To delete a letter press the function key “Delete” .
➢
Press the function key
“Validate”
to validate the name.
The recap of the Point/Point average is displayed.
➢ Press OK to display the graph.
➢ Press the function key “Zoom+” to display the detail of the calculated points .
➢ Press Esc key to back to the dataset screen.
➢
Press the function key
“Print”
to print the dataset.
Printing mode is displayed.
➢ Go to the line
“Channels info”
and press
OK
to print the channels on the printing ticket.
➢ Go to the line “Details” and press OK to print details of the dataset on the printing ticket.
➢ Press the function key “Validate” to print.
The instrument backs to the Point/point average display.
➢ Press Esc to back to “Measurement” menu.
7.2.2 Automatic average
This function allows to calculate an average value that the device measured in an interval chosen
time.
➢ Go to
“Automatic”
line in the “
Averages”
menu and press
OK
.
➢
Press the function key
“Start”
to start the measurement.
Duration is displayed.
➢
Press the function key
“Stop”
to stop the measurements.
Measurements, average, minimum and maximum values, standard deviation and duration
are displayed.
➢
Press the function key
“Start”
to launch a new automatic average.
➢ Press the function key “Save” to save the results.
A keypad is displayed on the bottom of the screen.
➢ Select the letters with arrow keys then press OK .
To go from the lower case keypad to the upper case keypad then to the numeric keypad:
➢ press the function key:
To delete a letter press the function key
“Delete”
.
➢
Press the function key
“Validate”
to validate the name.
The recap of the automatic average is displayed..
➢ Press OK to display the graph.
➢
Press the function key
“Zoom+”
to display the detail of the calculated points .
➢ Press Esc key to back to the dataset screen.
➢
Press the function key
“Print”
to print the dataset.
Printing mode is displayed.
➢ Go to the line
“Channels info”
and press
OK
to print the channels on the printing ticket.
➢
Go to the line
“Details”
and press
OK
to print details of the dataset on the printing ticket.
➢ Press the function key “Validate” to print.
The instrument backs to the automatic average display.
➢ Press Esc to back to “Measurement” menu.
7.2.3 Automatic Point/Point average
This function allows to calculate the average value of various points, calculated themselves on a
duration beforehand defined.
➢ Go to
“Auto Pt/Pt”
line in the “
Averages”
menu and press
OK
.
A duration is displayed on the bottom right of the screen.
18
START AND RECORD DATASETS