sauermann SI-CA 320, User Manual

Page: 80 / 144

80
11 PRINT
11.1 Print
CONTEXT KEY FUNCTION
◄
OK
►
Selects available parameters
Enter the selected parameter
Selects available parameters
PARAMETER DESCRIPTION
Allows the results of the Flue gas analysis to be printed on a report that confirms the execution of the
measurement. The printed values are those reported in the previously selected memory and displayed on the
screen when the menu is activated. Applies to combustion analyses, memory analyses, draught, opacity index,
ambient gases and leak test results.
SEE CHAPTER 11.2 .
The user, via this menu, can programme the printing mode of the report:
Copy: Allows you to define the number of copies to be printed. It is possible to print several copies of the
analysis report, and to choose between the proposed models that differ in terms of the information
they contain.
Model:
The selection of the report model applies only to combustion analyses and the choice is made
between complete, partial or total. The draught, opacity, ambient gases and leak test reports have
only one format. Flue gas analysis models have several formats:
Complete: includes the company and operator header previously saved in the configuration menu,
Flue gas analysis measurements and, if saved, draught, opacity and ambient CO values.
Reduced: only reports the essential measurements and information from the Flue gas analysis
without headers, comments or spaces for any operator annotations.
Total: composed of the complete model of the average analysis followed by the measurements of
each of the analyses performed.
Time/Date: Allows you to choose whether or not to print the date and time when the Flue gas
analysis was performed.
Manually: the date and time are not printed on the header of the analysis report. The operator will decide to
add them manually.
Auto:
the date and time are printed on the header of the analysis report.
SEE CHAPTER 11.3.
Via this submenu, the user can access the procedure for pairing the instrument with a Bluetooth ® printer. The
pairing procedure is done only once.
SEE CHAPTER 11.3.1.
Displays the MAC code of the Bluetooth printer paired with the instrument. If the code does not appear, perform
the pairing procedure.
SEE CHAPTER 11.4.
Allows to record on six lines of 24 characters the name of the Company or the owner of the instrument and the
information related to it (e. g. address, telephone number), these will be printed in the header of the analysis
report.
SEE CHAPTER 11.5 .
In this submenu, it is possible to display the Measures list carried out by the instrument. Using the interactive
keys, it is possible to add, delete, or move a selected measurement.
SEE CHAPTER 11.6.
21/03/18
10:00
Print
KEY FUNCTION
Enables the displayed interactive operations.
Return to the previous page.
Measures list
Report
Header
Measures list
Report
Printer
Header
Printer