12
11065435 • Rev AD • October 2011
DH and DS Motors
Assembly and Test Procedures
Assembly
Motor Assembly
(continued)
9. Place the end cover over the gear set
(Note orientation of end cover for DH
models).
10. Install washers and end cover bolts
(DH=6, DS=7).
Install End Cover
8. Grease an O-ring and place it in the
O-ring groove on the top of the gear
set.
11. Tighten the bolts using a 13 mm
socket. Torque to 30-35 N•m
[22-25 lbf•ft].
12. If drain plug was removed during
assembly or test. Torque to
32-44 N•m [24-33 lbf•in].
Install Shipping Plugs
13. Tighten the shipping plugs after
testing. Torque to 2.5-5.0 N•m
[22-44 lbf•in].
