Step 14
å
If you have already assembled the 419606 Lateral File, you will
need to remove the Lateral File Top by loosening the TWIST-LOCK®
FASTENERS in the Ends and Back.
å
First, fi nish drilling the four large holes shown in the bottom surface of
the Lateral File Top using a 1/4" drill bit. Follow the left diagram.
å
Next, fasten the Lateral File Top to the ENDS (A and B) using four
BLACK 2-1/4" FLAT HEAD SCREWS (26S).
å
NOTE: If you had to remove the Top from your Lateral File, re-attach it
to the Lateral File again by retightening six TWIST-LOCK® FASTENERS
in the Ends and Back. Follow the right diagram.
å
NOTE: If needed, follow the 419606 Lateral File instruction book to
fi nish the 419606 assembly.
419708
www.sauder.com/services
Page 18
B
A
419606 Later
al F
ile T
op
419606 Later
al F
ile T
op
BLACK 2-1/4" FLAT HEAD SCREW
(4 used in this step)
26S
Finish drilling these four holes.
