Table of Contents
Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
2-3
4-5
6-52
53-58
59-64
65-66
67
427287
www.sauder.com/service
Page 2
Part Identification
å
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A
RIGHT END (1)
B
LEFT END (1)
C
RIGHT UPRIGHT (1)
D
LEFT UPRIGHT (1)
D14 LARGE RIGHT DRAWER SIDE (2)
D15 LARGE LEFT DRAWER SIDE (2)
D20 SMALL RIGHT DRAWER SIDE (2)
D21 SMALL LEFT DRAWER SIDE (2)
D24 RIGHT DRAWER SIDE (2)
D25 LEFT DRAWER SIDE (2)
D74 SMALL DRAWER BACK (2)
D78 LARGE DRAWER BACK (2)
D109 DRAWER BACK (2)
D716 DRAWER BOTTOM (6)
E
MODESTY PANEL (1)
F
BOTTOM (2)
G
BACK (2)
H
RIGHT FRONT/LEFT REAR LEG (4)
J
FRONT MOLDING (2)
K
LEFT FRONT/RIGHT REAR LEG (4)
L
DRAWER FRONT (2)
M
SMALL DRAWER FRONT (2)
N
KEYBOARD DRAWER FRONT (1)
O
KEYBOARD DRAWER BACK (1)
P
KEYBOARD DRAWER BOTTOM (1)
Q
KEYBOARD DRAWER SIDE (2)
R
LARGE DRAWER FRONT (2)
S
SIDE MOLDING (4)
T
MODESTY PANEL MOLDING (1)
U
BACK MOLDING (2)
V
TOP (1)
