å
To insert the drawer into your unit, line up the EXTENSION SLIDES
on the drawer with the EXTENSION RAILS on the unit and push the
drawer into the unit until the drawer is fully inserted. The drawer will
push in hard until it is all the way in, then it will slide in and out easier.
å
Insert the GROMMETS (10P) and GROMMET CAPS (1P) into the
large holes in the TOPS (W and X).
å
Center a SCREW COVER (74P) over the head of each SCREW in the
LONG MODESTY PANEL (E) and RIGHT BACK (K) and gently tap in
with your hammer.
å
Using your hammer, gently tap a CAM COVER (75P) onto each visible
HIDDEN CAM and CROSS SLOTTED DOWEL.
Step 26
425014
www.sauder.com/service
Page 31
1P
10P
X
W
To cover HIDDEN CAMS and
CROSS SLOTTED DOWELS
To cover screws
75P
74P
74P
To cover screws
K
55 l
bs.
45 lb
s.
25 lb
s.
35 lbs.
E
