409128
www.sauder.com/services
Page 21
å
Fasten the TOP (E) to the BACKS (J and H). Tighten
four TWIST-LOCK® FASTENERS.
å
Fasten the TOP (E) to the UPPER ENDS (A and B).
Tighten eight HIDDEN CAMS.
å
Turn two CORD CLIPS (9P) into the bottom surface of
the TOP (E).
Step 16
A
A
B
B
E
H
J
J
Arrow
Minimum
190 degrees
Maximum
210 degrees
9P
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
The large hole is
closer to this edge.
