Step 4
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (32S) into
the LEFT END (B) until the shoulders of the SCREWS rest
on the surfaces of the END.
å
NOTE: Do not overtighten the SCREWS.
å
Slide the LEFT END MOLDING (L) onto the LEFT END (B).
Line up the grooves in the MOLDINGS over the heads of
the SCREWS in the END.
å
NOTE: The MOLDINGS should be even on both edges of
the END.
å
NOTE: If the MOLDING comes up off of the SCREWS,
remove it and slide it on again.
BLACK 9/16" FLAT HEAD SCREW
(2 used in this step)
32S
Sur
face without
TW
IST
-LO
CK
®
FAS
TEN
ERS
Shoulder
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
B
L
422191
www.sauder.com/services
Page 8
Just think. The sooner
you do this, the sooner
you do something else.
