Step 4
å
Fasten the ENDS (A and B) to the SHELF (E). Tighten two TWIST-LOCK® FASTENERS.
å
Insert four METAL PINS (1R) into the UPRIGHT (C).
å
Insert the METAL PINS (1R) in one end of the UPRIGHT (C) into the holes in the SHELF (E).
411236
www.sauder.com/services
Page 8
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
1R
1R
Finished edge
Finished edge
Sur
face
with holes
Unfi nished edge
A
B
C
E
The support pin
must be here.
