Sauder New Grange 420021, Manual

Page: 22 / 36

Step Step 17
420021 www.sauder.com/services Page 22
å
Insert the DRAWER SIDES (D30 and D31) at an angle
into the slot at each end of the DRAWER FRONT (O).
å
Slide the DRAWER BOTTOM (D988) into the
grooves in the DRAWER SIDES (D30 and D31) and
DRAWER FRONT (O).
å
Fasten the DRAWER BRACE (M67) to the DRAWER
FRONT (O). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D183) to the DRAWER
SIDES (D30 and D31) and DRAWER BRACE (M67). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
this step for the other DRAWERS.
Surface with
HIDDEN CAM
1 2
3 4
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Groove
Arrow
Maximum
210 degrees
Minimum
190 degrees
O
O
O
VIEW THE T-LOCK BOX VIDEO
D31
D30
D31
D988
D30
D30
D31
D183
Unfi n
ishe
d
surfa
ce
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots. With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
M67
M67