Step
Step 14
404961
www.sauder.com/services
Page 19
å
Insert the LONG METAL PIN (DD) into the small hole in
the edge of the RIGHT END (A2). Only insert about 1/4 of
the PIN into the hole.
å
Slide the patented* LONG END MOLDING (S) onto the
notched edge of the RIGHT END (A2). Carefully slide the
MOLDING until the end of the MOLDING is even with the
end of the RIGHT END.
å
NOTE: The MOLDING should overhang the surface with
holes. If the MOLDING overhangs the wrong surface,
remove it and slide it on again.
å
* U.S. Patent No. 5,499,886
Slide the END MOLDING (S)
onto the notched edge.
Notched edge
S
A2
DD
