Sauder Craft Pro 417047 Instruction Booklet Download Page 38

Page 38

www.sauder.com

417047

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. 

Carefully read the following chart.

Look out for:

What can happen:

How to avoid the problem:

• Overloaded drawers or shelves.

• Risk of injury.

• Top-heavy furniture can tip over.

• Overloaded drawers or shelves can break.

• Never exceed the weight limits shown in the 

instructions.

• Work from bottom to top when loading shelves 

and drawers. Place the heavier items on the 

lower shelves or in lower drawers.

• Improperly moving the cart.

• Risk of injury or equipment damage.

• The cart can tip if not moved carefully over 

obstacles or across a changing fl oor surface (for 

example, from a wood fl oor to a carpeted fl oor).

• Lift the cart so the casters clear any obstacles 

or abrupt changes in the fl oor surface.

• Placing TVs on furniture items that are not 

designed to support a television is

hazardous.

• Risk of injury or death. TVs can be very heavy. Plus 

the weight and location of the picture tube tends to 

make TVs unbalanced and prone to tipping forward.

• This product is not designed to support a 

television.

AVERTISSEMENT

Prière d’utiliser le mobilier à bon escient et avec prudence. Une mauvaise utilisation peut être à l’origine de risques

d’accident ou peut endommager le mobilier et les articles ménagers. 

Lire attentivement le tableau suivant.

À surveiller :

Danger éventuel :

Solution :

• Tiroirs ou tablettes surchargées.

• Risque de blessure.

• Du mobilier mal équilibré risque de se

renverser.

• Des tiroirs surchargés peuvent casser.

• Ne jamais excéder les limites de poids 

indiquées dans les instructions.

• Commencer a charger les tablettes et tiroirs à 

partir du bas et fi nir au haut. Placer les objets les 

plus lourds sur les tablettes inférieures ou dans 

les tiroirs inférieurs.

• Déplacer le desserte improprement.

• Risques d’accident ou peut endommager le 

mobilier.

• La desserte risque de se renverser si ne

déplace pas avec précaution sur les obstacles ou sur 

le changement de la surface du sol (par exemple, de 

un sol en bois sur un sol avec moquette).

• Soulever la desserte de façon à ce que les 

roulettes passent les obstacles ou changements 

brusques dans la surface 

du sol.

• Il est dangereux de placer des téléviseurs sur 

des meubles que ne sont pas prévus à cet eff et.

• Risque de blessures graves, voire mortelles. Les 

téléviseurs peuvent être particulièrement lourds. De 

plus, le poids et l’emplacement du tube image ont 

tendance à rendre les téléviseursinstables et enclins 

à tomber vers l’avant.

• Ce produit n’est pas destiné à supporter un 

téléviseur.

ADVERTENCIA

Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad

o daño a las unidades o artículos domésticos. 

Cuidadosamente lea la tabla a continuación.

Esté alerto de:

Puede ocurrir:

Evitar el problema:

• El sobrecargo de cajones o estantes.

• Un riesgo de lesiones.

• La caída de mobiliario inestable.

• La rotura de cajones sobrecargados.

• Nunca exceda los límites de peso indicados en 

las instrucciones.

• Para cargar los estantes y cajones, comience 

al fondo y termine en la parte superior. Coloque 

los artículos más pesados sobre los estantes 

inferiores o en los cajones inferiores.

• Mover el carrito inapropiadamente.

• Riesgo de lesiones o daño al equipo.

• El carrito puede inclinar si no se mueve con 

cuidado sobre los obstáculos o sobre una 

superfi cie de piso que cambie (por ejemplo, sobre 

un piso en madera junto a un piso alfombrado).

• Levante el carrito de manera que las 

ruedecitas pasen un obstáculo u otro cambio 

repentino en la superfi cie del piso.

• Es peligroso colocar los televisores sobre 

muebles que no están diseñados para

soportar un televisor.

• Un riesgo de lesiones o la muerte. Los

televisores pueden ser muy pesados. Además, el 

peso y la ubicación del tubo de imagen tienden 

a causar la inestabilidad de televisores y son 

propensos a inclinarse hacia adelante.

• Este producto no está diseñado para soportar 

un televisor.

Summary of Contents for Craft Pro 417047









































Reviews: