Step 6
421934
www.sauder.com/services
Page 11
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (32S) into the MODESTY PANEL (G) until the
shoulders of the SCREWS rest on the surface of the MODESTY PANEL.
å
NOTE: Do not overtighten the SCREWS.
å
Slide one of the MODESTY PANEL MOLDINGS (R) onto the MODESTY PANEL (G). Line up the
groove in the MOLDING over the heads of the SCREWS in the MODESTY PANEL.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again.
å
NOTE: The MOLDING should be centered on the MODESTY PANEL.
å
Flip the MODESTY PANEL (G) over and repeat this step to the other surface of the MODESTY
PANEL (G) with the remaining MODESTY PANEL MOLDING (R).
Shoulder
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
R
G
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
32S
32S
R
G
R
R
FL
IP
O
V
E
R
