å
Fasten the UPRIGHTS (D and E) to the TOP (T). Tighten
four TWIST-LOCK® FASTENERS.
å
Slide the CENTER BACK (O) into the grooves of the
UPRIGHTS (D and E).
Step 4
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
O
D
E
T
Finished sur
face
Groove
Sur
face with holes
419958
www.sauder.com/services
Page 8
Just think. The sooner
you do this, the sooner
you do something else.
These holes must be here.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Meet Part (T). This component has
been engineered to be lighter, stronger,
faster… well ok. Not technically faster.
But defi nitely makes for a sturdier
Hutch that’s easier to assemble and
friendlier to the environment.
