å
Slide the SUPPORT ROD (DD) through the RIGHT UPRIGHT (C).
å
Turn the TURNBUCKLE (FF) several turns onto the LONG SUPPORT
ROD (EE). Turn the SUPPORT ROD (DD) into the other end of the
TURNBUCKLE several turns.
å
NOTE: If the TURNBUCKLE will not turn onto the threads, use the other
end of the TURNBUCKLE. Turn the TURNBUCKLE onto the RODS until
the holes in the SUPPORT ROD (DD) line up with the holes in the TOP (E).
å
Now, fasten the SUPPORT ROD (DD) to the TOP (E). Use two SILVER
9/16" PAN HEAD SCREWS (VV).
å
Hand tighten the TURNBUCKLE until it is snug. Now, use your screwdriver
to tighten the TURNBUCKLE another 1/4 turn.
å
NOTE: Tighten the TURNBUCKLE more if the TOP ever begins to sag.
Step 10
404972
www.sauder.com/services
Page 15
SILVER 9/16" PAN HEAD SCREW
(2 used in this step)
VV
E
C
FF
DD
EE
Drawers on both sides of the desk
