å
Carefully turn the unit over onto its front edges. Unfold the LARGE BACK (G). Lay the LARGE BACK (G) and the SMALL
BACKS (H) over the unit. Nail the BACKS (G and H) to the unit along the edges of the TOP (E), BOTTOM (F), ENDS (A
and B) and UPRIGHTS (C and D). Use sixty-six NAILS (1N).
å
NOTE: Be sure to tap the NAILS (1N) into the holes that line up over the UPRIGHTS (C and D).
å
NOTE: The backs will overlap each other along the edges of the UPRIGHTS (C and D).
å
NOTE: Perforations have been provided for access through the BACKS (G and H). Carefully cut out the holes needed.
å
Fasten the FOOT BRACKETS (6E) to the BOTTOM (F). Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the SUPPORT FEET (FF) onto the FOOT BRACKETS (6E).
å
Firmly push the CORNER CAPS (5E) onto the SUPPORT FEET (FF).
Step 12
415572
www.sauder.com/services
Page 18
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
G
H
H
A
B
E
F
6E
6E
FF
FF
5E
5E
Unfi
nished
sur
face
6E
BLACK 9/16" LARGE HEAD SCREW
(6 used for the FOOT BRACKETS)
1S
NAIL
(66 used in this step)
1N
These holes must line
up over the UPRIGHTS.
These perforated
holes must be here.
