Carefully turn your unit over onto its front edges. Unfold the BACK (H) and lay it over your unit.
Fasten the BACK (H) to your unit using the NAILS (1N).
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
Fasten the FOOT BASE (24E) to the BRACE (O). Use four SILVER 5/8" FLAT HEAD SCREWS (23S).
Push the FOOT (25E) into the FOOT BASE.
NOTE: Turn the FOOT for adjustment. The FOOT should not extend beyond the wooden FEET (R and S).
Page 16
www.sauder.com/services
414466
12
12
S
te
p
23S
SILVER 5/8" FLAT HEAD SCREW
(4 used for the FOOT BASE)
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(32 used in this step)
1N
Un
fi nished
surface
H
The cut out in the BACK
should sit on the top
surface of the BOTTOM.
24E
25E
O
