Sauder Boone Mountain 361887, Instruction Manual

Page: 23 / 36

Step 20
416971 www.sauder.com/services Page 23
VIEW THE T-LOCK BOX VIDEO
å
Fasten the DRAWER BACK (D73) to the DRAWER SIDES (D16 and D17). Use four BLACK 1-9/16" FLAT HEAD
SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D720) inserts into the groove of the DRAWER BACK (D73).
å
Repeat this step for the other drawer using the RIGHT DRAWER FRONT (R).
1 2
3
å
Insert the DRAWER SIDES (D16 and D17) at
an angle into the slot at each end of the LEFT
DRAWER FRONT (S).
å
Slide the DRAWER BOTTOM (D720) into the grooves
in the DRAWER SIDES (D16 and D17) and LEFT
DRAWER FRONT (S).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
30S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
D16
D17
D720
D720
D16
D17
D73
D17
S
S
Unfi
nished
sur
face
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D16