Step 34
418270
www.sauder.com/services
Page 39
å
Push the RUBBER SLEEVES (2R) over the METAL
PINS (1R). Insert the METAL PINS into the hole locations of
your choice in the LEFT END (B) and LEFT UPRIGHT (D). Set
the ADJUSTABLE SHELF (N) onto the METAL PINS.
å
To insert the drawer into your unit, tip the front of the drawer
down and drop the rollers on the drawer behind the rollers
on the unit. Lift the front of the drawer up and slide it into the
unit. Repeat this step to insert the pencil drawer.
å
To insert the large drawer into your unit, line up the
EXTENSION SLIDES on the drawer with the EXTENSION
RAILS on the unit and push the drawer into the unit until the
drawer is fully inserted. The drawer will push in hard until it is
all the way in, then it will slide in and out easier.
(4 used)
2R
1R
B
D
60 lbs.
40 lbs.
10 lbs.
5 lbs.
30 lbs.
20 lbs.
30 lbs.
40 lbs.
N
