Step 9
420456
www.sauder.com/service
Page 13
å
Carefully turn your unit over onto its front edges. Unfold the
BACK (E) and lay it over your unit.
å
A perforation in the BACK (E) has been provided for access
to the SAFETY STRAP. Punch out the perforation and push
the SAFETY STRAP through the hole.
å
Make equal margins along all four edges of the BACK (E).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (E) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the UPRIGHT (C2).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(45 used in this step)
1N
E
These holes must line up
over the UPRIGHT (C2).
Before fastening the
BACK, punch out the
perforation and push
the SAFETY STRAP
through the hole.
Safety strap
