Step 14
419517
www.sauder.com/service
Page 18
D975
D50
D51
D167
D50
D50
D51
D51
VIEW THE T-SLOT BOX VIDEO
L
L
M65
L
1
3
2
4
Push down
å
Pull the DRAWER FRONT BRACKETS (9G) apart and slide them
into the grooves in the DRAWER SIDES (D50 and D51). You may
need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten a DRAWER FRONT (L) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D975) into the
grooves in the DRAWER SIDES (D50 and D51) and
DRAWER FRONT (L).
å
Fasten the DRAWER BRACE (M65) to the DRAWER
FRONT (L). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D167) to the DRAWER
SIDES (D50 and D51) and DRAWER BRACE (M65).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the other three drawers using
DRAWER FRONTS (L and M).
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
1S
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
Unfi
nished sur
face
Surface with
HIDDEN CAM
9G
Hidden part using
recycled material.
Color may vary.
