Step 5
å
Carefully turn the RIGHT END (A) over.
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (CCC) into
the END (A) until the shoulders of the SCREWS rest on
the surface of the END.
å
Slide the END MOLDING (M74) onto the END (A). Line
up the groove in the MOLDING over the heads of the
SCREWS in the END and slide it until it is against the
RIGHT FRONT LEG (U).
å
Fasten the RIGHT REAR LEG (W) to the RIGHT END (A).
Use three BLACK 2 1/4" FLAT HEAD SCREWS (XX).
412267
www.sauder.com/services
Page 10
W
A
U
Angled edge
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the END.
Shoulder
BLACK 2-1/4" FLAT HEAD SCREW
(3 used in this step)
XX
BLACK 9/16" FLAT HEAD SCREW
(2 used in this step)
CCC
M74
M74
