Page 7
www.sauder.com/services
411885
3
3
S
te
p
Turn four BLACK 9/16” FLAT HEAD SCREWS (CC) into the ENDS (A and B) until the shoulder of the SCREWS rest on the surface
of the ENDS.
Slide the END MOLDINGS (N) onto the ENDS (A and B). Line up the groove in the MOLDINGS over the head of the SCREWS in
the ENDS.
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Shoulder
A
B
N
N
These edges
should be even.
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
CC
These edges
should be even.
