Step 10
å
Carefully turn your unit over onto its front edges. Unfold the BACK (G) and lay it over your unit.
å
Fasten the BACK (G) to the LEGS (I and J). Use eight BROWN 7/16" LARGE HEAD SCREWS (II). Fasten the
remaining BACK (G) to your unit using the NAILS (KK).
å
NOTE: Be sure to tap NAILS into the holes that line up over the SHELF (F).
å
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
å
Fasten the FOOT BASE (U) to the EXTENSION BLOCK (K). Use four BLACK 9/16” PAN HEAD SCREWS (GG).
Then, push the FOOT (T) into the FOOT BASE (U).
å
NOTE: Turn the adjustable end of the ADJUSTABLE FOOT completely in. Final adjustments will be made after
the unit is standing upright.
410627
www.sauder.com/services
Page 14
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
These holes must line
up over the SHELF (F).
NAIL
(33 used in this step)
KK
G
K
T
U
BLACK 9/16" PAN HEAD SCREW
(4 used for the FOOT BASE)
GG
BROWN 7/16" LARGE HEAD SCREW
(8 used in this step)
II
I
J
Turn completely in.
