å
Carefully stand your unit upright.
å
1. Insert the remaining PIVOT HINGE (X) into the
WASHER (Y) and into the BOTTOM(I).
å
2. Insert the PIVOT HINGE, which is fastened to the
DOOR (N), into the hole in the SHELF (HH3). You will
need to tilt your DOOR slightly.
å
3. Now, tip the DOOR in and fasten the free HINGE to the
DOOR. Use a BROWN 7/16" LARGE HEAD SCREW (HH)
å
Fasten the HANDLE (Z) to the DOOR (N). Use two BLACK
7/8" FLAT HEAD SCREWS (FF).
å
NOTE: To make adjustments to the DOOR, loosen the
SCREW in the HINGE, make needed adjustments, and
tighten the SCREW.
Step 12
408726
www.sauder.com/services
Page 16
31S
BLACK 7/8" FLAT HEAD SCREW
(2 used for the HANDLE)
FF
BROWN 7/16" LARGE HEAD SCREW
(1 used for the PIVOT HINGE)
HH
X
Y
N
I
HH3
Z
1
st
2
nd
3
rd