å
Carefully turn your unit over onto its front edges. Lay the
BACKS (K and O) over your unit.
å
Make equal margins along all four edges of the BACKS (K
and O). Push on opposite corners of your unit if needed to
make it "square".
å
Fasten the BACKS (K and O) to your unit using the NAILS (SSS).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed.
å
Tighten the TWIST-LOCK® FASTENERS in the MODESTY
PANEL (G) at this time.
Step 15
G
K
O
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(35 used in this step)
SSS
Cut-out for lifting the desk
Cut-out for lifting the desk
408291
www.sauder.com/services
Page 20
Tighten two
TWIST-LOCK®
FASTENERS.
