Sauder 401822, Manual

Page: 21 / 40

Step 15
401822 www.sauder.com/services Page 21
VIEW THE T-LOCK BOX VIDEO
å
Fasten the FILE DRAWER BACK (D78) to the FILE DRAWER SIDES (D87 and D88). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
NOTE: Be sure the LARGE DRAWER BOTTOM (D708) inserts into the groove of the FILE DRAWER BACK (D78).
å
Repeat this step for the other drawers. The upper drawer will use the UPPER DRAWER FRONT (R), UPPER DRAWER
SIDES (D132 and D138), UPPER DRAWER BACK (D77), and DRAWER BOTTOM (D707). The middle drawer will use the MIDDLE
DRAWER FRONT (W), MIDDLE DRAWER SIDES (D10 and D11), DRAWER BACK (D86), and DRAWER BOTTOM (D707).
1 2
3
å
Insert the FILE DRAWER SIDES (D87 and D88)
at an angle into the slot at each end of the FILE
DRAWER FRONT (M).
å
Slide the LARGE DRAWER BOTTOM (D708) into the
grooves in the FILE DRAWER SIDES (D87 and D88) and
FILE DRAWER FRONT (M).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
D87
D88
D708
D708
D87
D88
D78
D88
M
M
Unfi
nished
sur
face
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D87
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(16 used in this step)
30S