Step 13
401632
www.sauder.com/services
Page 18
å
Insert the DRAWER SIDES (D83 and D84) at
an angle into the slot at each end of the
DRAWER FRONT (K).
å
Slide the DRAWER BOTTOM (D977) into the
grooves in the DRAWER SIDES (D83 and D84) and
DRAWER FRONT (K).
å
Fasten the DRAWER BRACE (M64) to the
DRAWER FRONT (K). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D169) to the DRAWER
SIDES (D83 and D84) and DRAWER BRACE (M64). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
1
2
3
4
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
Groove
Arrow
Maximum
210 degrees
Minimum
190 degrees
K
K
M64
K
M64
VIEW THE T-LOCK BOX VIDEO
D84
D83
D84
D977
D83
D83
D84
D169
Unfi
nished
sur
face
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
Be sure the
DRAWER
BOTTOM inserts
into the DRAWER
BACK groove.
Surface with
HIDDEN CAM