Step 13
S
å
Carefully turn your unit over onto its front edges. Unfold
the BACK (S) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (S).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (S) to your unit using the NAILS (14).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the SHELVES (F and K).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished sur
face
NAIL
(45 used in this step)
14
8
These holes must
line up over the
SHELVES (F and K).
Page 18
www.sauder.com/service
429579
