12
101702
An enlarged portion of the LOCKING DRAWER FRONT (H2) is shown in this step.
-
Fasten the
LOCK (AA)
to the
LOCKING DRAWER FRONT (H2)
in the exact order shown. It is important to make
sure the
CAM
points as shown. Meanwhile, the key must turn counter-clockwise 1/4 turn to lock properly. The
CAM
should swing upward when locked.
NOTE:
If the key will not turn counter-clockwise, turn it clockwise and fasten the CAM as shown.
NOTE:
When the drawer is locked, the CAM should be positioned in the groove in the bottom surface
of the TOP (C).
LOCKING
DRAWER
FRONT (H2)
Turn the
KEY
counter--clockwise
to lock.
SCREW
CAM
NUT
WASHER
LOCK
The prongs must press into the
LOCKING DRAWER FRONT
as you tighten the
NUT
with an
adjustable wrench.
This end of the
CAM
must be farther away
from the
LOCKING
DRAWER FRONT
than the other end of
the
CAM.
www.sauder.com/services