- 15 -
UVC-123263.4 EN
PARTS DESCRIPTION
1.
Battery pack
2.
Handle
3.
Power button
4.
Speed button
5.
Auto mode and speed indicators
6.
Battery pilot light
7.
Clog warning indicator
8.
Dust cup
9.
Dust cup release button
10.
Accessory release button
11.
Suction hole opening
12.
Extension tube
13.
Tube adjusting button
14.
Floor brush A
15.
Floor brush B
16.
Crevice nozzle
17.
Dusting brush
18.
Charging seat/ wall-mounted bracket
19.
Charging adapter
Floor brush A: with soft brush rollers, perfect for hard floors, especially sensitive wood floor. Pick up coarse and
fine dirt at the same time.
Floor brush B: with hard brush roller, perfect for carpets. Pick up debris below the surface of your carpets.
Dusting brush: for removing fine dust and particles from curtains and other delicate surface.
Crevice nozzle: for corners, niches and other hard-to-reach places, such as car seat and mat, picture frame, etc.
HOW TO WALL-MOUNT CHARGING SEAT:
1.
Measure the distance between the holes situated at the back of the bracket and drill three holes in the wall
with the same distance.
2.
Put the expansion bolts into the holes and then use the screws to fix the bracket onto the wall.
3.
Pay attention to the height of the bracket mounted. Recommended installation height is 110 cm.
Make sure there are no gas, water or electrical cables and wires behind the mounting area before drilling.
